![]() Because this overlap created too much fiberglass thickness to cure clear, it was instead hidden behind a stainless steel trim piece. The fiberglass on the transom was tabbed onto the hull side and applied over the already cured fiberglass on the hull. The fiberglass was applied to the entire hull and overlapped 1″ at the stem. fiberglass applied to the hull using the dry method. As the process neared completion, they learned that a string of incandescent white Christmas lights under the hull allowed them to see excess epoxy that they could wipe away or use to create fillets.Ħ oz. His son David was the most involved and put in about half as many hours as Mark. Since this was a family build, his helpers were his kids. One helper followed him to catch any squeeze-out or drips, while the other was inside the hull doing the same thing. With two helpers during this process, he was able to finish it in good time. Mark dry fit 6″-wide Okuome plywood strips at a 45° angle by loosely stapling them, then removed them and glued them into place. Since a majority of the hull was empty space at this point, the only way to get a fair surface was to sand multiple battens and frames at a time using a longboard. Sanding between layers helps the next layer to lie down nicely and will prevent distortions caused by uneven thicknesses of wood or epoxy drips that have cured. Mark decided to deprive himself of the extra “fun” of sanding at the end and fair the hull before the first laminate was applied and between each successive layer. However, when cold molding a boat, waiting until the last possible moment to sand would make for a lot more sanding. When we mention fairing or the process of making a surface smooth, we’re generally referring to the final step of sanding before coating with epoxy or paint. This prevents water that might be sitting in the bilge from penetrating into the wood.Īttaching the battens to the bottom of the boat. Mark pre-coated the frames and stringers in epoxy before the assemblies were glued. Friends offered to lend him chainsaws to extend the doorway, but that wasn’t needed thanks to his attention to detail. The construction of the hull was done in his basement and when completed had to be carried out a double door at a 45° angle. To bond the frames and transom together, Mark used WEST SYSTEM 105 Epoxy Resin with 206 Slow Hardener and wax-coated padded clamps to reduce slippage. Mark began by building sawn frames using white ash on a sturdy table covered with plastic sheeting. Anyone considering a build similar to this should consult Mark’s website,, for more detailed descriptions of each step. In this article, I’ll give a brief overview of this build where WEST SYSTEM® Epoxy was used. Mark used his background in woodworking, marketing, and computer science to share his first-time boat-building experience to encourage and help other first-time boat builders. Websites or blogs with good information tended to end once the structure was built. Mark had never built a boat before and found lackluster information from first-time boat builders like himself. The boat turned heads wherever Mark took it and the reaction from bystanders was a universal “WOW.” That’s how his beautiful Glen-L Riviera got its name. The20′ runabout was nearly complete but not yet named. In June of 2000, Mark Bronkalla launched his homebuilt Glen-L Riviera. If this is not the case, please respond so a Game Master can manually review it.Cover Photo: WOW, a 20′ Glen-L Riviera built by Mark Bronkalla ![]() Your ticket was identified to be about the issue addressed above. Apologies for any inconvenience this may cause in the meantime. A future client patch will update the incorrect reward display. In addition, please note the reward for this quest was changed to 5 Marks of Honor, 200 Honor, and a Steel Strongbox. Be advised any fix that is implemented may not be retroactive and will require another brawl to be completed to receive credit. Our developers are actively investigating this and working on a fix as soon as possible.Ĭustomer Support is unable to grant quest completion credit while they continue their investigation. Thank you for contacting Customer Support regarding an issue with the "Something Different" quest to complete a PVP Brawl. Here is the response to my in-game ticket: No details yet on a solution to the issue. Winning a brawl will not count towards quest objective for some players, in some cases if you win multiple times it still will not complete. Quest is currently bugged for the brawl on the week of 09/19/18. Commentaire de spoonymogEDIT UPDATE: As of the week of this is working for the current brawl.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |